FIND A SENSOR PRODUCT Here
Passive Speed Sensors
Analog Variable ReIuctance (VR) Geartooth Sensors Passive
Sensors generate a sine; wave output with; no external power source. Voltage is
determined by target speed and air gap.
- No
external power supply required
- High
reliability. long life
- Simple
2- wire installation
- No
moving parts or contacts
- Operating
Temp -40°C to + 185°C
- Wide
variety of styles and sizes
- Pole
piece from .040" to 1.25"
- Spade, conical, round or blind pole piece available
Active Speed Sensors
Hall
Effect (HE) Geartooth Sensors Measures target speed from zero to
20,000 pulses per second. Output frequency is proportional target speed.
- True
zero speed sensing
- Digital
output
- No moving
parts or contacts
- Supply
Voltage from 4.5 - 24Vdc
- Operating
Temp -40°C to + 125°C
- Wide
variety of styles and sizes
- Rugged
design
- Configurable for most environments
Digital Variable Reluctance (DVR) Geartooth Sensor
Internal
circuitry converts analog output to digital pulses. 30 inches per second (IPS)
to 1500 IPS, reptition (frequency) to 20,000 Hz.
- Near
zero speed sensing
- Digital
output
- Reliable
VR Technology
- Supply
Voltage from 4.5 - 24Vdc
- Operating Temp -40°C to + 125°C
Speed and Direction Sensors
True Quadrature Hall Effect (HE) Speed and Direction Sensors Two 90° out-of-phase outputs measure speed and the direction of travel of gear teeth or other ferrous targets.
- Direction
of travel sensing
- True
zerao speed sensing
- Digital
output
- Supply
Voltage from 4.5 - 24Vdc
- Operating
Temp -40°C to + 125°C
- No
moving parts or contacts
- Easy orientation
Proximity Switches
Zero Speed, Non-contact HE Proximity Switch measures rotary or linear motion. Registers the transition of target magnet past the face of the sensor. Frequency to 100,000 Hz.
- Digital
output
- Supply
Voltage from 4.5 - 24Vdc
- Operating
Temp -40°C to + 125°C
- No
moving parts or contacts
- Easy orientation
Miniature Sensors
MSC offers full function gear tooth sensors as small as 1/4" diameter for limited space applications. Variable Reluctance, Digital Variable Reluctance, and Hall Effect true-zero speed sensing. Tubular and threaded styles with choice of termination.
Explosion Proof Sensors
ATEX and CSA certified safe for hazardous environments, such as methane gas, flammable liquids, airborne dust or other explosive available.
OTHER SENSING PRODUCTS
- Digital Switches
- Proximity Sensors
- Position Sensors
- Position Switches
- Vane Sensors
- Temperature
- Dual Output
- Home Positioning
STANDARD CONFIGURATIONS
Most MSC sensors are available in all industry standard configurations.
- Tubular Case
- All Threaded Case
- Thread, Hex Head
- Thread, Knurl Head
- MS Connector
- Threaded, Hex Body
Also:
FIange-type bolt•on, machined, cast and molded housings.
Terminations: Twisted Wire, Cable. Shielded Cable. Crimped Terminals, Connectors.
>> Don't See Your Sensors? Contact Us